|
|
Iron Butt
Posts: 935 Rockford, IL | Managed to spill/loose quite a bit of Dyna Beads while installing my DS tire. Local bike shop who is familiar with the beads says to simply pour in another few ounces and that it won't cause any issues. Said that its much better to have way to much rather than not enough. He also said a trick to installing the beads is to cut a "fair sized" corner of the bag and carefully set the bag inside the tire and then finish mounting it and add air and install on the bike. He says the beads will pour out of the bag and do their job and the bag will cause no harm. Your thoughts/opinions/SWAGS |
|
|
|
Tourer
Posts: 482 Beer Collins, Colorado (there is no fort) | the trick I've used was to fill a small bottle that has a spout and a piece of tubing stuck on it. fill the bottle with beads and put the tube on the valve stem and touch an engraving tool to the valve stem and the beads flow like water. |
|
|
|
Iron Butt
Posts: 752 Broken Arrow, OK | ByteN2it - 2014-06-26 7:04 PM
the trick I've used was to fill a small bottle that has a spout and a piece of tubing stuck on it.
+1, can't imagine doing it any other way. I lost the bottle that came with my first kit but grabbed a 3 pack of bottles at Harbor freight for a buck. |
|
|
|
Visionary
Posts: 3773 Pittsburgh, PA | https://www.youtube.com/watch?v=-AaPu2IZy8c |
|
|