MC jack
Bullyrider
Posted 2011-06-25 7:58 AM (#89615)
Subject: MC jack


Puddle Jumper

Posts: 28
Newnan Ga
Will a regular Craftsman MC jack work with the CC? Just by getting down and looking I'm not too sure it will? On my Bully the bike sat on the frame while on the jack...the CC I'm not so sure?

Thanks,

Chuck
Top of the page Bottom of the page
FlukerM
Posted 2011-06-25 10:34 PM (#89640 - in reply to #89615)
Subject: RE: MC jack


Puddle Jumper

Posts: 8
Eglin AFB, FL
Works just fine. Line the jack up with the kick stand. Start by putting a 2X4 under the kick stand, Because the engine case is not square on the bottom a couple of shims will make it steadier. It also seems to sit on the stand better. I also dropped the bags off. Seems to move the CG forward.

Top of the page Bottom of the page
Slappy
Posted 2012-09-25 7:42 AM (#124208 - in reply to #89615)
Subject: Re: MC jack


Puddle Jumper

Posts: 32
Heres a few pictures of my 2012 XCT on the Craftsman jack. Used a 1/4 inch shim on left side rear to steady things better



(IMG_3984 r.jpg)



(IMG_3988r.jpg)



(IMG_3988r.jpg)



(IMG_3985r.jpg)



Attachments
----------------
Attachments IMG_3984 r.jpg (63KB - 0 downloads)
Attachments IMG_3988r.jpg (79KB - 1 downloads)
Attachments IMG_3988r.jpg (79KB - 0 downloads)
Attachments IMG_3985r.jpg (74KB - 0 downloads)
Top of the page Bottom of the page