You are currently not logged in.  Logon or register to access more features. Cross-Riders.com is a FREE service provided by Victory Riders Network.

Search:




lowers for forged bars
Jump to page : 1
Now viewing page 1 [25 messages per page]		View previous thread :: View next thread
   Discussion -> Cross Country / Cross Roads Tech Q&AMessage format
 
poppamark
Posted 2012-01-19 6:57 PM (#105683)
Subject: lowers for forged bars


New user

Posts: 4
has anyone heard of a supplier working on hard lowers along the lines of the 2012 xct , the cee baileys and victory soft lowers just don't seem  right to me











Top of the page Bottom of the page
ammo_umb
Posted 2012-02-24 9:38 AM (#108482 - in reply to #105683)
Subject: Re: lowers for forged bars


Puddle Jumper

Posts: 8
I emailed JTD Cycle Parts last week and was told that their hard lowers for forged bars should release in April. HMD520 is also working on some and has had a spot reserved for the on his website for months.

Whoever comes out with a nice product the soonest better be ready to build a lot of them!

@ HMD - do you have any updates on your progress? How about an estimated release date?

Edited by ammo_umb 2012-02-24 9:38 AM
Top of the page Bottom of the page
7of9
Posted 2012-03-12 6:41 PM (#109895 - in reply to #108482)
Subject: Re: lowers for forged bars


Puddle Jumper

Posts: 7
Emailed HMD this weekend - His reply:
"We have them in line to be made.. we are currently working on the bag extensions and rear fender. the lowers will be next. Atleast 2 to 3 week s out. Sorry.

Thank you,

Mike Saenz
HMD520
(520) 301-4000
www.hmd520.com"

So hopefully in a couple of weeks we'll have something :-)
Top of the page Bottom of the page
Roughrider
Posted 2012-08-13 2:13 PM (#121453 - in reply to #105683)
Subject: RE: lowers for forged bars


Puddle Jumper

Posts: 18
Comfort, Texas		Look:
JTD Hard Lowers. Love the function and looks. I ride in triple digit weather. No more heat than without!
Cuts thru the air. Fuel mileage is great! Ride is stable and quiet.



(JTD Lowers4.jpg)



(_DSC0137.JPG)



Attachments
----------------
Attachments JTD Lowers4.jpg (4KB - 9 downloads)
Attachments _DSC0137.JPG (97KB - 8 downloads)
Top of the page Bottom of the page
Whiskeygut
Posted 2012-08-25 8:35 PM (#122198 - in reply to #105683)
Subject: Re: lowers for forged bars


Puddle Jumper

Posts: 8
Are those spot lights in the close outs? How is the fit & finish? Did you have to get them painted when they arrived?
Top of the page Bottom of the page
Roughrider
Posted 2012-08-27 9:18 AM (#122317 - in reply to #122198)
Subject: Re: lowers for forged bars


Puddle Jumper

Posts: 18
Comfort, Texas

Those are LED Driving Lights that you can order with the JTD Hard Lowers!

Fit and Finish is very good!

I painted the Lowers using Plasti-Dip/Black and finished with Plasti-Dip/Glossifer!





(DSC_0173 copy.JPG)



Attachments
----------------
Attachments DSC_0173 copy.JPG (90KB - 7 downloads)
Top of the page Bottom of the page
Big Vic
Posted 2012-08-30 4:08 PM (#122600 - in reply to #105683)
Subject: Re: lowers for forged bars


Iron Butt

Posts: 619
Southeast Iowa		Those look really nice.............Victory missed the boat on that one!
Top of the page Bottom of the page
JTDman
Posted 2012-09-26 9:24 PM (#124310 - in reply to #105683)
Subject: Re: lowers for forged bars


Puddle Jumper

Posts: 7
I want to let everyone know I have been tracking issues where it seems the forged bars may not 100% the same from set to set. I know of bikes that the lowers fit perfect while others have a top outer corner out a bit. Although I install every pair on a set on my bench, I had the opportunity to install a set myself on a new friends bike Matt from Ontario this weekend.

First installed right side and the top corner did not fit flush to the bar. Took it back off and it fit again on bench bar just fine. With a lot of patience from Matt, I was able to find a solution by modifying the two wholes where they bolt to the foot peg holes on the bars. The fix was oval the holes for more adjustment. I am now modifying all my parts for both left and right side. A round file opens hole nicely. If anyone has any issues just give me a call or email I will be glad to send a new set of middle brackets. If you would like info on fix I can post pics.

Ride safe everyone!
John Montani

PS: Here is another great photo just seen today. I wish it was mine but it's not....

Edited by JTDman 2012-09-26 9:27 PM




(P1020205.jpg)



Attachments
----------------
Attachments P1020205.jpg (51KB - 3 downloads)
Top of the page Bottom of the page
JayFL459
Posted 2012-11-21 11:30 PM (#127296 - in reply to #105683)
Subject: Re: lowers for forged bars


Puddle Jumper

Posts: 9
Lake City, FL		These I like ...
Top of the page Bottom of the page
mmorris1960
Posted 2013-02-21 5:38 AM (#131128 - in reply to #105683)
Subject: Re: lowers for forged bars


New user

Posts: 1
Check out Baker Air Wings!
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

Copyright © 2007-2024 Victory Riders Network™