You are currently not logged in.  Logon or register to access more features. Cross-Riders.com is a FREE service provided by Victory Riders Network.

Search:




how to wire lights on foot boards
Jump to page : 1
Now viewing page 1 [25 messages per page]
View previous thread :: View next thread
   Discussion -> Cross Country / Cross Roads Tech Q&AMessage format
 
hajb2
Posted 2013-09-14 2:51 AM (#144476)
Subject: how to wire lights on foot boards


New user

Posts: 1
i have just leds from kewlmetal to fit on my cross country foot boards . if some could tell what the wire colours are for running lights, the left turn flasher and the right turn flasher. i have also got the module from kewlmetal which has the wiring schematic diagram. thanks if some could help with this.
Top of the page Bottom of the page
Ben_D
Posted 2013-10-14 11:39 AM (#146651 - in reply to #144476)
Subject: RE: how to wire lights on foot boards


New user

Posts: 2
Open the harness under the seat. Find the green/pink wire-this is 12V switched power. The dark blue/red wire is right side turn signal power, and the dark blue wire is left turn signal power. Good luck.
Top of the page Bottom of the page
thephoenix2010
Posted 2013-11-03 4:20 PM (#148470 - in reply to #144476)
Subject: Re: how to wire lights on foot boards


New user

Posts: 2
I have the kewlmetal setup on my foot boards... works perfectly. If you get in a real jam, email me and I can give you some hints on how to make it happen. I took some pics of under my seat connections.
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

Copyright © 2007-2024 Victory Riders Network™