You are currently not logged in. Logon or register to access more features. Cross-Riders.com is a FREE service provided by Victory Riders Network.
|
|
|
|
New user
Posts: 2
| Hi guys, first post on this forum and am in a pickle. Need to pull my flywheel off to fix the one way starter clutch on my Vision. Anyone know what exact size puller I need. I have tried 18mmx1.50 and that is too small.
Thanks,
Show |
|
| |
|
Visionary
Posts: 4278
| I don't under stand pulling flywheel
(starter.gif)
Attachments
----------------
 starter.gif (36KB - 0 downloads)
|
|
| |
|
New user
Posts: 2
| Behind the flywheel lives a split gear setup. Between the two split gears is a one way starter clutch assembly that provides the contact to the crank portion of the split gear. My one way clutch busted from a serious buck or backfire during cold weather start up.......................... Item 12 is the idler gear which provides the rotation from the starter to the split gear I am talking about. You have to pull the flywheel to seperate the split gear assembly............
Show
Edited by ShowTime56 2015-02-02 6:47 PM
|
|
| |
|
Cruiser
Posts: 111
Salina, KS | I would give Rylan a call at The Vic Shop, he is a super nice guy and would be able to give you all the info needed for your repair. |
|
| |
Jump to page : 1
Now viewing page 1 [25 messages per page] | |
|
| Copyright © 2007-2024 Victory Riders Network™
|
|
106 Flywheel puller size?
