You are currently not logged in.  Logon or register to access more features. Cross-Riders.com is a FREE service provided by Victory Riders Network.

Search:




Learn Lash Procedure for X-Country
Jump to page : 1
Now viewing page 1 [25 messages per page]
View previous thread :: View next thread
   Discussion -> Cross Country / Cross Roads Tech ReferenceMessage format
 
Jedi Jeff
Posted 2011-03-11 1:34 PM (#81195)
Subject: Learn Lash Procedure for X-Country


Rockland, MA United States
For those that don't know, the Learn Lash Procedure is the order of adjustments/steps you run thru if your cruise control is acting erratic.

Based on his answer from another forum thread, here's what Kevinx shared:

1-Press & hold the resume & on/off buttons on the cruise control switch.
2-Turn the ignition switch on.
3-While holding both buttons, start the engine.
4- After the engine starts, watch the cruise indicator lamp on the indicator display until it goes out.
5-When the cruise control lamp goes out, release both buttons at the same time.
6-Press & hold the resume . the cruise indicator lamp should illuminate.
7-Listen for a brief increase in engine RPM(very slight RPM increase)as the cruise control module performs the procedure.
8- Release the resume button when the RPM drops down to idle speed & turn off engine.

The procedure is used when replacing the cruise control cable. The procedure takes any slack or free play out of the cruise cable where it connects to the throttle body.
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

Copyright © 2007-2017 Victory Riders Network™