You are currently not logged in.  Logon or register to access more features. Cross-Riders.com is a FREE service provided by Victory Riders Network.

Search:




windshield for XC
Jump to page : 1
Now viewing page 1 [25 messages per page]
View previous thread :: View next thread
   Discussion -> Cross Country / Cross Roads DiscussionMessage format
 
Ranman
Posted 2011-03-24 4:54 PM (#82257)
Subject: windshield for XC


Puddle Jumper

Posts: 12
I am 6'3" and need help figuring out how tall I need the windshield. I want to be able to look over it but still have wind blocked. I looked at CeeBee's and like their stuff. Suggestions Please??
Top of the page Bottom of the page
randyyo
Posted 2011-03-24 9:23 PM (#82294 - in reply to #82257)
Subject: RE: windshield for XC


Puddle Jumper

Posts: 27
Leduc Alberta Canada
Hey Ranman,
Check CeeBailey's again.
They just released a new sheild for the Cross Country
Top of the page Bottom of the page
Ranman
Posted 2011-03-24 9:49 PM (#82296 - in reply to #82294)
Subject: RE: windshield for XC


Puddle Jumper

Posts: 12
Thanks, I did see they have a new shield but I am not sure how tall to go. I want to look over it but not too short. I am also wondering about the differences between to the two styles. Anyone have the bew styles and the tint. Basically I know nothing about the windshields. I just bought the XC Tuesday and love it except for the wild buffeting.
Top of the page Bottom of the page
ltbiker
Posted 2011-03-25 4:24 AM (#82313 - in reply to #82257)
Subject: RE: windshield for XC


Cruiser

Posts: 92
Chandler, AZ
Another option to consider is Gustafsson out of Florida:
http://www.bikescreen.com/index.html

They make a "flip", and looks like the flip is pretty significant, so should work well.
Hit SEARCH and type in Cross Country. I did a mock-up using light cardboard, taped a ruler to the stock shield, marked off different inch measurements on the cardboard and taped it on, and rode around the block with it at different levels. For me, the +3" looks like the highest I can go and still see over the top; I'm 5'10" though. Was all set to order tomorrow, but now may have to decide between it and the new Cee Bailey Dragon mentioned above (Thanks for the heads-up!). Cee Bailey's gives you their recommendation based on height; also outlines a way to measure exactly using taped-on ruler and string.
Good luck with your decision.
Top of the page Bottom of the page
Ranman
Posted 2011-03-25 9:51 PM (#82413 - in reply to #82313)
Subject: RE: windshield for XC


Puddle Jumper

Posts: 12
Thanks for the info. I ordered from Cee Bailey. Got a 15" stock type shield light gray color. $150 + $22 shipping. If it's too high I can return it and they will cut it down for me. I'm just not crazy about the flip shields look.
Top of the page Bottom of the page
Ranman
Posted 2011-04-07 9:27 PM (#83478 - in reply to #82257)
Subject: Re: windshield for XC


Puddle Jumper

Posts: 12
Got my cee bailey's shield and tested it out. 15" works great for my height. Cut out the buffeting, only get a little wind at the top of my head and can hear the radio perfectly. I can also see over the shield instead of through it.
Top of the page Bottom of the page
Jedi Jeff
Posted 2011-04-12 12:18 PM (#83822 - in reply to #83478)
Subject: Re: windshield for XC


Fountain Inn, SC United States
Ranman - 2011-04-07 10:27 PM

Got my cee bailey's shield and tested it out. 15" works great for my height. Cut out the buffeting, only get a little wind at the top of my head and can hear the radio perfectly. I can also see over the shield instead of through it.


Great. Care to show a photo of the bike with the new shield?
Top of the page Bottom of the page
NewCrew
Posted 2011-04-13 7:11 AM (#83898 - in reply to #82257)
Subject: Re: windshield for XC


New user

Posts: 4
I got a Cee Bailey Cee Dragon and a Gustafsson. The Cee Baileys a great windshield as always but I had some fit and finish issues with the Gustafsson & it just doesn't do the job like the Cee Baileys.
Top of the page Bottom of the page
ltbiker
Posted 2011-04-16 3:46 AM (#84097 - in reply to #82257)
Subject: RE: windshield for XC


Cruiser

Posts: 92
Chandler, AZ
I just put a Cee Bailey Dragon on mine couple of days ago - 18" in Dark Gray. Fit was great. At 5'10", I see just barely over the top of it; a 17" would have been better for vision. A definite improvement over the stock 9" Vic shield, but need to get the lower wind deflectors.......kind of hard to tell now what's coming from below vs. over the top. I may still get a Gustafsson 2+ with the flip, then decide which one works best for me, but will hold off until I get lowers installed.
Top of the page Bottom of the page
Ranman
Posted 2011-04-18 5:19 PM (#84252 - in reply to #83822)
Subject: Re: windshield for XC


Puddle Jumper

Posts: 12
I will post some pics when I gety my pipes back. I am getting different baffles installed to improve the sound.
Top of the page Bottom of the page
Slappy
Posted 2012-09-15 5:17 PM (#123646 - in reply to #82257)
Subject: Re: windshield for XC


Puddle Jumper

Posts: 32
I'm 6'3" and just installed the 7Jurock 13 inch flip on my 2012 XCT. Looking about 1 inch over the top.
No buffeting or excessive wind noise noticed. 7Jurock's grey tint is more towards a medium grey. If I do this again I'll go with the clear. http://www.7jurock.com/store/index.php?act=viewProd&productId=328 but call as the site does not list the Cross Country Tour yet.

Edited by Slappy 2012-09-15 5:36 PM




(7jurock front.jpg)



(7jurock small.jpg)



Attachments
----------------
Attachments 7jurock front.jpg (96KB - 6 downloads)
Attachments 7jurock small.jpg (88KB - 3 downloads)
Top of the page Bottom of the page
densred12xc
Posted 2012-10-03 10:21 AM (#124597 - in reply to #82257)
Subject: RE: windshield for XC


Puddle Jumper

Posts: 39
Fostoria Ohio USA
I just ordered a 7 Jurock 14" with flip in the gray tint for my 2012 XC. I am 6'1" and hopefully can look over the top of it. From what I can gather the flip edge is what helps direct the turbulence up over the rider's head. I'm just going to have to wait until I get it to see if the height will work for me or not.
Top of the page Bottom of the page
skyking
Posted 2012-10-05 12:26 PM (#124726 - in reply to #82257)
Subject: Re: windshield for XC


Puddle Jumper

Posts: 8
Wellston, Ohio
Its the air that flows under the fairing and up over the gas tank that causes the buffeting. Deflectors mounted on the forks or lower edges of fairing is what helps stop the head bobble.
Top of the page Bottom of the page
COLT425
Posted 2012-10-06 10:22 AM (#124779 - in reply to #82257)
Subject: Re: windshield for XC


Puddle Jumper

Posts: 36
I HAVE THE 7JUROCK 12 INCH FLIP ON MY 2011 CC AND I CAN SEE OVER THE TOP WITH NO BUFFETING I'M 5 FT 7 . THEY ARE VERY NICE TO DEAL WITH AND ARE VERY AFFORDABLE.
Top of the page Bottom of the page
densred12xc
Posted 2012-10-23 2:41 PM (#125590 - in reply to #82257)
Subject: Re: windshield for XC


Puddle Jumper

Posts: 39
Fostoria Ohio USA
I am very pleased with my 7 Jurock 14" with "flip" so far. I am only 6 foot and one half inch tall and can see over it if I'm sitting up straight (about to the bridge of my nose, maybe a bit lower). The light gray tint doesn't bother me as most of my riding is done in the daytime.
Top of the page Bottom of the page
00dirtfan
Posted 2012-12-29 8:48 PM (#128930 - in reply to #82257)
Subject: Re: windshield for XC


New user

Posts: 4
I started with the tall stock on my xct. No issue with wind or noise. Tried a KW Flip, at 6'1" the wind buffeting around my head was too much, back to stock, but did like looking over instead of through windshield. Measured and ordered a 7 Jurock 13" flip. This one is close in height to stock, but I am looking over it. In 3 months when the snow melts I will get to try it. I took the Jurock shield to a local printing place along with my stock shield. They were able to copy the black trim that hides the windshield brackets perfectly.
Top of the page Bottom of the page
00dirtfan
Posted 2012-12-29 8:48 PM (#128931 - in reply to #82257)
Subject: Re: windshield for XC


New user

Posts: 4
I started with the tall stock on my xct. No issue with wind or noise. Tried a KW Flip, at 6'1" the wind buffeting around my head was too much, back to stock, but did like looking over instead of through windshield. Measured and ordered a 7 Jurock 13" flip. This one is close in height to stock, but I am looking over it. In 3 months when the snow melts I will get to try it. I took the Jurock shield to a local printing place along with my stock shield. They were able to copy the black trim that hides the windshield brackets perfectly.
Top of the page Bottom of the page
bagger
Posted 2013-01-01 12:47 PM (#129041 - in reply to #82257)
Subject: RE: windshield for XC


New user

Posts: 2
lake eufaula ok.
i got my shield from 7jrock and it,s perfect great workman ship and fit to my hardware was easy 205.00 a good price
Top of the page Bottom of the page
Scottyp
Posted 2013-09-17 8:51 PM (#144619 - in reply to #124726)
Subject: Re: windshield for XC


Puddle Jumper

Posts: 14
I have a question as to how these are measured. I have a 2013 cross country and if I measure from the top of the stock shield to the cutout vent, it is 11".
I want to get about 3-4" higher so should I get a 14"?
The 13" shown above by Slappy looks a lot taller than 2" above stock to me.
Thanks!
Top of the page Bottom of the page
randyyo
Posted 2013-09-17 9:56 PM (#144625 - in reply to #82257)
Subject: Re: windshield for XC


Puddle Jumper

Posts: 27
Leduc Alberta Canada
Scottyp
Top of cut out to the top of the windshield (9inches).
Does your shield have a flip at the top?
If it does it is not stock it will be the one from Victory shield from KlockWerks(11inches).


Edited by randyyo 2013-09-17 9:57 PM
Top of the page Bottom of the page
Scottyp
Posted 2013-09-17 10:14 PM (#144626 - in reply to #82257)
Subject: Re: windshield for XC


Puddle Jumper

Posts: 14
No mine is stock, no flip. I am considering getting the flip but am not sure what size I should order.
Top of the page Bottom of the page
vic2004-08
Posted 2013-09-18 3:40 PM (#144659 - in reply to #82257)
Subject: Re: windshield for XC


Cruiser

Posts: 87
Lusby,Md
Go to madstad.com,friend of mine bought it and loves it.
Top of the page Bottom of the page
Scottyp
Posted 2013-09-30 8:53 PM (#146064 - in reply to #82257)
Subject: Re: windshield for XC


Puddle Jumper

Posts: 14
Considering the Madstad but wonder what it is like in the rain. I can see rain pouring through the gap and soaking me rather than diverting it over and around.?
Top of the page Bottom of the page
slatevalley
Posted 2013-10-14 9:35 AM (#146643 - in reply to #82257)
Subject: Re: windshield for XC


Puddle Jumper

Posts: 11
Really like the Madstads .I don't think rain would be a problem
Top of the page Bottom of the page
Andy2010
Posted 2013-10-15 7:41 AM (#146708 - in reply to #146064)
Subject: Re: windshield for XC


New user

Posts: 1
Omaha, NE

I have an 11"madstad on my '13 XCT and i have ridden heavy rain and the unit works very well. I would say better than the stock as you don't have to fight trying to fight looking through it. I did not get any more rain on me than I did with the stock shield either.

 

Andy

Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

Copyright © 2007-2024 Victory Riders Network™