You are currently not logged in. Logon or register to access more features. Cross-Riders.com is a FREE service provided by Victory Riders Network.
|
|
|
|
Puddle Jumper
Posts: 12
| I need to remove my exhaust pipes and I have never attempted this. I don't see too much of a problem except the heat shields are strapped to the pipes. How do you remove the straps t oget the shields off? Just cut them? Also when I put them back on what kind of straps do I use to reinstall them? Where can I buy them? Any suggestions or tips are appreciated.
Thanks,
RM |
|
| |
|
Fountain Inn, SC United States | Don't have a XC so can't say for sure but the Vision owners have had to cut the strapping off the pipes. They reattach the heat shields using hose clamps (6" I believe).
YOu can check out this thread that talks about the Vision mod:
http://www.vision-riders.com/bb/forums/thread-view.asp?tid=7527&pos... |
|
| |
|
Puddle Jumper
Posts: 12
| Thanks for the info. |
|
| |
|
Puddle Jumper
Posts: 23
| Yep, this previous post is correct. Had to cut them off my XR then use hose clamps. Check the different hose clamp lengths so you don't get too much excess hanging out from the screw down area. Then be careful where you place screw down so you can get at them for tightening once pipes are back on bike. |
|
| |
|
New user
Posts: 2
| Did My dad's XC this past weekend
http://www.thevog.net/forum/cross-country-44/free-cross-country-dee... |
|
| |
|
Cruiser
Posts: 71
B'ham, Al. | You removing the pipes or the mufflers?
RR |
|
| |
Jump to page : 1
Now viewing page 1 [25 messages per page] | |
|
| Copyright © 2007-2024 Victory Riders Network™
|
|
Removing exhaust pipes for mod
