|
|
Iron Butt
Posts: 935
Rockford, IL | Ok.....I ride with several HDs with Pro Chargers and some with built motors that are charged. Couple of them are over 200hp and one pushing 225. One of my best friends is one of the top 3 sellers/installers of Pro Charger units in the U.S. He told me a few months ago that Pro Charger is working with someone and it "won't be long and we will be able to charge your Vision". I knew it was Lloydz....who else could it possibly be?? But anyways he ran the math and came up with some numbers that he thinks should be "fairly accurate" and he shows that a charged non-cammed Vision should be at 130/132hp and a cammed Vision should be at 149/152hp. This is without head work or high compression pistons. The stock clutch can probably handle the additional HP. Heck, it handles a 116 kit with no issue. Few of the benefits of a Pro Charger setup is that they are durable as hell. Have a decent warranty. Are a bit easy to install. But the best thing is that it can removed when you sell the bike and installed on your next bike. Ain't like internal motor work where you sink the money and eventually watch it go away. I hope Lloydz setup has these same benefits.
Edited by Lotzafun 2012-08-03 9:46 AM
|
|
| |
|
Tourer
Posts: 457
Green Bay, WI United States | Just returned home from a 4 hr tour with me and the Lady on Twister. We like to be at more than speed when merging and both commented that the Vision is fast and powerful. I told her about the Pro Charger along with internal mods and we agreed that for two up I have plenty of power. Now, put me on a souped up Vision with this kit and I would be in trouble with the law. Just sayin....
|
|
| |
|
Visionary
Posts: 3204
Memphis | I talked to a Victory engineer at the AVR a couple of years ago and he said that the stock Vision drivetrain and lower end of the motor (crank/rods) were engineered to handle up to 150 hp. |
|
| |
|
Cruiser
Posts: 154
Cabot Arkansas | "Ok.....I ride with several HDs with Pro Chargers and some with built motors that are charged. Couple of them are over 200hp and one pushing 225. "
Wow those are some awesome numbers.How many thousands does it cost to get that kinda of power out of a harley motor as it must certainly require extensive work and all new internals. |
|
| |
|
Iron Butt
Posts: 1109
| Maverick - 2012-08-03 4:52 PM "Ok.....I ride with several HDs with Pro Chargers and some with built motors that are charged. Couple of them are over 200hp and one pushing 225. " Wow those are some awesome numbers.How many thousands does it cost to get that kinda of power out of a harley motor as it must certainly require extensive work and all new internals.[/QUOTE ?The question is why. I've ridden with a few HD's with close to to those numbers and the reliability was terrible. |
|
| |
|
Tourer
Posts: 373
Lansing, MI |
DROOL, DROOL..................
|
|
| |
|
Visionary
Posts: 1340
Gainesville Fl Home of the Gators | Stock Vision clutch is a gonner at 120FtLb |
|
| |
|
Tourer
Posts: 499
Chattanooga, TN | This is awesome! I do have one question though. When I had cams installed, I was told it would not invalidate the engine warranty. I doubted this, but to heck with it, I wanted MO POWER! Does anybody know for sure if this (or the cams for that matter) will invalidate the factory warranty or extended warranty on the powertrain? |
|
| |
|
Visionary
Posts: 1340
Gainesville Fl Home of the Gators | baadawg - 2012-08-08 5:13 PM
This is awesome! I do have one question though. When I had cams installed, I was told it would not invalidate the engine warranty. I doubted this, but to heck with it, I wanted MO POWER! Does anybody know for sure if this (or the cams for that matter) will invalidate the factory warranty or extended warranty on the powertrain?
If you get caught it will violate your factory warranty on powertrain, and it will violate the entire extended.....If you get caught |
|
| |
|
Iron Butt
Posts: 623
| just visited the pro charger website. I see a where they are bragging about 2 Harley bikes boosted up to 147 and 139 HP respectively and are proud that the bikes have reached 30k miles.....NO THANKS. if 30k is such a big deal, no thanks. I like to ride too much |
|
| |
|
Tourer
Posts: 373
Lansing, MI |
That's on an HD, not a Vic.... |
|
| |
|
Tourer
Posts: 323
Troy, NY | It will avoid the warranty is they can see it. Most likely they would see the VFC III and void the warranty that way. The price we pay for more HP & Torque  |
|
| |
|
New user
Posts: 1
| http://www.youtube.com/watch?v=n__bvVs2jBE
Here is a little more detail on the bike, like the feedback guys! |
|
| |
|
Cruiser
Posts: 188
| LLoyd,
Just sent you a PM. I would like to be on the list for your Vision Supercharger kit.
Can't wait to see it when it comes out! |
|
| |
|
Visionary
Posts: 4278
| Can you imagine the gross of tires you would use every year.
I use to run nitrous on a couple bikes and every one wanted to race. It was to the point if you didn"t put up a hundred dollar bill I would even push the button |
|
| |
|
Tourer
Posts: 373
Lansing, MI |
No crap, I only got about 5200 out of my last one...
It would be worth it though!!!
|
|
| |
|
Iron Butt
Posts: 810
| +1 .........Hmmm ??? Can the lockup clutch handle 180 HP ???? Can the clutch and power train handle this much power? Also, any Dyno Charts to post ???
|
|
| |
|
Cruiser
Posts: 77
| Just want to give you guys an update on the supercharger kits. These are going to happen! They are wicked cool, They look awsome and finacially I have WAY to much time money and effert wrapped up in the project not to sell kits. BUT they need to be right! We are currently working on making them an easier install and ironing out some small issues. Overall I am very pleased and I wont release any numbers yet and why should I? You sum bitches know its gonna thump if its got my name on it, just smoke a doobie and chill alittle with a cold can in hand and those numbers will be displayed soon enough. |
|
| |
|
Tourer
Posts: 373
Lansing, MI |
TEASE!!! Looking forward to it Lloyd!
|
|
| |
|
Cruiser
Posts: 188
| No shit!! Tease indeed.
I cant wait to see what the numbers are. We already know the kit will be top notch.
I am looking forward to this winter project indeed. |
|
| |
|
Visionary
Posts: 2300
Georgia, west of Atlanta | I like it !!!!! Sounds like a winner............. |
|
| |
|
Puddle Jumper
Posts: 11
| Lloyd,
Add me to the pro charger list for the Vision.
|
|
| |
|
Cruiser
Posts: 132
New York | Patiently awaiting your numbers Lloyd and yes, I'm highly interested in a possible trip to Pine Bush for an installation! |
|
| |
|
Visionary
Posts: 2300
Georgia, west of Atlanta | Numbers YES: HP, TQ and $$$$...........I know it'll be good Lloyd. |
|
| |
|
Puddle Jumper
Posts: 46
Taylorsville, KY | Expect these to cost around $5,000+ based on the price of procharger kits for HD's |
|
| |
Lloydz Custom Victory Build
