|
|
Puddle Jumper
Posts: 28
Hendersonville, NC | VISION ROAD PEG BRACKET FOR TALL RIDERS
http://www.arizonavictory.com/eshopprod_cat_2302-61041_product_7415...
i found these on an older post have a question, anyone who might have them or have heard about them do they interfere with the bike in corners running through the twisties and can you still add the chrome cover to the tip over
thanks |
|
| |
|
Cruiser
Posts: 115
Katy, TX United States | I have them on my Vision. No problems with curves or twisties.
(2013-09-11_06-17-22_589 reduced.jpg)
Attachments
----------------
 2013-09-11_06-17-22_589 reduced.jpg (172KB - 1 downloads)
|
|
| |
|
Cruiser
Posts: 115
Katy, TX United States | Forgot to say I am 6'4" and like them. |
|
| |
|
Puddle Jumper
Posts: 28
Hendersonville, NC | This is great, this will be next on my list i really didnt care for the under floor board kind for the simple fact they are not out far enough and they interfere with your feet, thanks for the pic looks good |
|
| |
|
Cruiser
Posts: 249
Phenix City AL. | For the normal rider ( this is subjective LOL) that set up is fine, if you really get after it you will drag those long horn mounts in a hurry, they will limit the cornering angle by quite a bit, but if you are not that aggressive they will do fine. |
|
| |
|
Tourer
Posts: 466
Grand Cane, LA | I have those same mounts but used the original pegs from the under the floorboard mounts. I have yet to drag the pegs but I can still drag the floorboards. |
|
| |
|
Cruiser
Posts: 115
Katy, TX United States | The pegs will not hit the ground. The floorboard hits, then if you are more aggressive, you will be hitting the tip over protectors. |
|
| |
|
Cruiser
Posts: 251
Mechanicsville, VA United States | I bought those VISION ROAD PEG BRACKET FOR TALL RIDERS , I also bought the Kuryakyn 4616 Longhorn Offset SweptWing........very nice stuff
I can stretch out as I'm 6'4" too.
I tried to get them to touch the road and can't get any closer than maybe 6" from the ground, very nice and safe pegs.......they're out of the way of your feet when putting your foot on the ground too not like the ones that go under your floor boards. I had them and almost dropped my bike when trying to put my foot down. I took them off after the first mistake, scaried the crap out of me.
Edited by diamonbird 2013-09-21 5:47 AM
|
|
| |
|
Puddle Jumper
Posts: 28
Hendersonville, NC | this it's exactly as I thought after seeing the floor board mounted type so that will definetely be my next order to get a set of the az mounts, thanks to all for the insight |
|
| |
|
Iron Butt
Posts: 880
Orlando, FL | jb hatch pegs are similar but less expensive and much better. And you can put whatever "peg" you want on the mount. I wouldn't have anything else on my ride but JB's peg mounts. |
|
| |
|
Puddle Jumper
Posts: 28
Hendersonville, NC | the jb hatch pegs mounts, can you attach the screw in style pegs on them and how do you get a hold of jb hatch pegs, is it a store a member something else |
|
| |
VISION ROAD PEG BRACKET FOR TALL RIDERS
