|
|
Visionary
Posts: 1290
Ruskin, Fl | I just ordered CycleOps. They had the cheapest shipping. $5.70.
Every other place was 13 for shipping. I just couldn't pay 70% for shipping.
Any install tips? Happy with it?
I grab a handful of throttle all the time. I'm looking forward to trying this |
|
| |
|
Cruiser
Posts: 178
LaGrange, GA | I have one, but I kind of had to. A bunch of years ago I got a 1/4 throttle for a dirt bike, and ever since anything factory feels ridiculous. It's usually my first mod on any bike, within just a few days. I typically just make them out of PVC, but this time got Lloyds because someone got it for me as a gift.
No real install tips, there's nothing to it. There was BARELY enough cable on my bike to get it installed, though. The cables are at max slack and there's essentially no free play.
Edited by BrandonM7 2014-04-30 9:57 AM
|
|
| |
|
Iron Butt
Posts: 691
Manchester, CT | You are going to love the 1/4 turn throttle. I've been using for about 10K miles now.
Tip: loosen the throttle cable adjusters. It will give you a little extra slack making hooking the cables into the ring easier. |
|
| |
|
Puddle Jumper
Posts: 8
MA facing NH, MA United States | Street Eagle - 2014-04-30 12:42 PM
You are going to love the 1/4 turn throttle. I've been using for about 10K miles now.
Tip: loosen the throttle cable adjusters. It will give you a little extra slack making hooking the cables into the ring easier.
+1 oh yes you will love it.. get one!! !  |
|
| |
|
Cruiser
Posts: 178
LaGrange, GA | Street Eagle - 2014-04-30 12:42 PM
You are going to love the 1/4 turn throttle. I've been using for about 10K miles now.
Tip: loosen the throttle cable adjusters. It will give you a little extra slack making hooking the cables into the ring easier.
I didn't have a choice - my adjusters had to go to full slack and I still had to do a little finagling to get it slid in place. |
|
| |
|
Visionary
Posts: 4278
| couldn't get it to work on my 08 sitting in tool box.
Did look Vic changed the housing in 2010 cables stayed the same. |
|
| |
|
Visionary
Posts: 1290
Ruskin, Fl | Thanks. It's on the way! |
|
| |
|
Iron Butt
Posts: 691
Manchester, CT | JV
Lloyd offers 2 different 1/4 turn throttle rings. The HR1 will fit '08-current Factory Rubber Grips. The HR2 will fit '99-'07 Factory Grips and '08-current Ness Grips |
|
| |
|
Cruiser
Posts: 164
Quad Cities, IL | I have one on my 2008 SSG Vision...I do like it alot. I cheated and had the dealer put it on since I was replacing my worn heated grips last fall. So no install tips from me. But it is a nice addition. |
|
| |
|
Puddle Jumper
Posts: 9
| I have one on my '08 Vision. I love it. I win the hole shot almost every time. if loosening the cable adjusters at the switch housing won't give you enough cable to work with, you can loosen them at the throttle body too. |
|
| |
|
Visionary
Posts: 1290
Ruskin, Fl | Oooh, I can't wait. No shipping notification yet. :-( |
|
| |
|
Cruiser
Posts: 196
| It was a very welcome addition to my '08! |
|
| |
|
Cruiser
Posts: 60
Bradenton, FL | The throttle on my Vision was the worst ever, couldn't believe the factory would send a bike out like that. Now it feels like it is supposed to. |
|
| |
|
Cruiser
Posts: 60
Wichita, KS | Big ditto on all the positive commemts. You'll be glad you did. I especially like it in 6th gear going down the highway. Just a little twist and that semi is in the rear view mirror.
Edited by Bodacious 2014-06-05 2:32 PM
|
|
| |
|
Puddle Jumper
Posts: 6
D/FW, TX | Just installed mine last week and love it! Screwed in both cables all the way in on the throttle body to give plenty of slack. Once installed, you can adjust them back. It was a bit tedious to get to the adjusters with a wrench, but that's the hardest part of the install. Piece o cake. |
|
| |
|
Visionary
Posts: 1365
Central Maryland | Cadillac Bob - 2014-05-26 7:20 PM
The throttle on my Vision was the worst ever, couldn't believe the factory would send a bike out like that. Now it feels like it is supposed to. What was wrong with your throttle? I don't feel anything out of the ordinary with mine. |
|
| |
|
Tourer
Posts: 341
West Salem, WI United States | I'm thinking about ordering one, I'm getting a bit of wrist fatigue (carpal symptoms) and thinking this would help with that? |
|
| |
|
North Billerica, MA | I kinda like the factory throttle. It has a nice long roll and that's the way I ride. |
|
| |
|
Puddle Jumper
Posts: 20
| Does the 1/4 turn throttle affect the cruise control when you make adjustments on the cables ? |
|
| |
|
Cruiser
Posts: 241
Monrovia, Ca | No it doesn't affect the cruise |
|
| |
|
Cruiser
Posts: 155
Victoria Tx, TX United States | I ordered one!! The throttle on the Vision is took long. And this will correct it!! |
|
| |
Llyodz 1/4 turn throttle ring
