|
|
Visionary
Posts: 1340
Gainesville Fl Home of the Gators | Just read the entire service bulletin, and this should be quick, and easy. Vic is sending a digital dial indicator with a hard mount fixture. If the engine fails the test the solution is super simple. Remove the primary, and add a diamond coated thrust space between the crank, and flywheel. This will properly space the crank, and thrust service. The whole thing should take a couple of hours, and includes oil, and all pre Loctite coated bolts. |
|
| |
|
Iron Butt
Posts: 1066
Peru, IN | Nice of you to let us know Kevin! |
|
| |
|
Cruiser
Posts: 180
Georgia On My Mind.... United States | Yippie!
Edited by Pops 2014-05-07 9:09 PM
(clap.jpg)
Attachments
----------------
 clap.jpg (139KB - 1 downloads)
|
|
| |
|
Visionary
Posts: 1340
Gainesville Fl Home of the Gators | Pops that was awesome
|
|
| |
|
Cruiser
Posts: 178
LaGrange, GA | Are we not worried about the metallic debris that will result? Expected to be such a tiny amount the filter will quickly pick it up? |
|
| |
|
Visionary
Posts: 1340
Gainesville Fl Home of the Gators | There is no cutting or grinding with this repair, and if you need it, an oil change will be provided with it.
The thrust surface in the primary case was not cut properly, and there is a CHANCE the flywheel could rub the case. The shim goes between the flywheel, and crank; to space the flywheel out a few thousands. The same exact type of shimming can be found in auto manufactures forever. I set up end play for the crank with shims on my air cooled VWs, and they have been doing that since the 30's |
|
| |
|
Visionary
Posts: 8144
New Bohemia, VA | No big deal for sure. Kudos to Victory for taking care of this quickly on the limited number of bikes affected. I was looking up motorcycle recalls and got inidated with ones from Harley, Ducati, Triumph, and BMW for recent years. Wow! |
|
| |
|
Iron Butt
Posts: 752
Broken Arrow, OK | and kudos to Kevin. Thanks for taking the time. |
|
| |
|
Cruiser
Posts: 178
LaGrange, GA | kevinx - 2014-05-09 10:06 AM
There is no cutting or grinding with this repair, and if you need it, an oil change will be provided with it.
The thrust surface in the primary case was not cut properly, and there is a CHANCE the flywheel could rub the case. The shim goes between the flywheel, and crank; to space the flywheel out a few thousands. The same exact type of shimming can be found in auto manufactures forever. I set up end play for the crank with shims on my air cooled VWs, and they have been doing that since the 30's
Ohhh, I gotcha - I thought the diamond coated spacer was intended to grind and self-clearance, like a diamond-coated sharpening stone. So it's really just diamond coated so it will be really hard and permanent - I get it. That sounds a lot better than what my mind had. |
|
| |
|
Cruiser
Posts: 180
Georgia On My Mind.... United States | kevinx - 2014-05-08 11:36 AM
Pops that was awesome
(please capt.jpg)
Attachments
----------------
please capt.jpg (18KB - 0 downloads)
|
|
| |
No Ride Recall.......SOLUTION!!!
